Special Purpose Racks
New England Biolabs, Inc. 50 ml Magnetic Separation Rack – 4 tubes
The 50 ml Magnetic Separation Rack is designed to be used for small-scale separations using magnetic particles.
Electron Microscopy Sciences Angled Tube Rack Stand, 1 each
Easily view samples and tube contents at a 30 degree angle. Help alleviate repetitive pipetting related fatige and injuries by creating a comfortable work station. Neoprene pad holds rack in place while non-slip feet prevent stand from sliding on benchtops. Stand is compatible with most tube racks. Holds racks up to 5.50" high and 8.50" wide.
Health Care Logistics Inc IV POLE W/SCEW HEIGHT ADJ F
Chrome IV Pole with Screw Height Adjuster. •This IV Pole is lightweight for convenient transport, yet durable for gravity infusions. •Five legs with black plastic swivel casters provide easy movement and stability. •Two casters are electrically conductive to divert static charges and have lockable roller brakes to prevent movement. •Diameter of pole base with casters: 26-1/2" •Includes one plastic bottle holder which will hold four bags or bottles. •Maximum Set Up Height from floor: 83"
USA Scientific Inc CoolSafe chamber for 0.2 mL tubes
CoolSafe chamber for 0.2 mL tubes or plates, aluminum. Holds 96 0.2 mL tubes, four 1.5 mL tubes, and six 0.5 mL tubes.
V&P Scientific Inc MAGNETIC RACK, For use with the VP 772F2M-1 Base, 14 Flip Top Microcentrifuge Tubes
MAGNETIC BEAD SEPARATION RACK, For use with the VP 772F2M-1 Base, 14 Flip Top Microcentrifuge Tubes,1.5mL or 5.0mL Volume, 1 Sided Bead Pellet Location, Variable Positions, 48MGO, NdFeB Magnet, 18mm Center Spacing, 13mm Hole Diameter, Polycarbonate
Leica Biosystems Leica Slide Rack for 30 Slides
Slide Rack - 30 holds up to 30 standard microscope slides and supports organized slide handling during staining, processing, transport, and storage. The manufacturer listing provides limited specification details; material, dimensions, and pack size are not specified on the product page.
- Holds up to 30 standard microscope slides.
- Organizes slides for staining, processing, and storage.
- Supports streamlined slide handling in histology workflows.
- Suitable for laboratory use where slide organization is required.
Uline Standard Mobile Stackable Bin Organizer - 36 X 58"
Standard Mobile Stackable Bin Organizer-36X58IN
Chemglass Life Sciences Spool Racks, Mobile, holds up to 6 each 13 spools
Spool Rack, Mobile. Rack is on casters making it easy to move from lab to lab. It will hold up to 6 each 13 spools. With the rack being only 17 wide it can fit into tight spaces between lab benches and hoods. Constructed of powder coated aluminum making the unit light and resistant to most lab environments. Rack is 35 Long x 17 Wide x 52 tall.
EPICYPHER INC Magnetic Separation Rack, 0.2 mL Tubes
Magnetic Separation Rack for use with up to sixteen 0.2 mL PCR tubes for separation of paramagnetic beads in a variety of cell-based or molecular biology applications. Solid aluminum construction with hard coat anodizing for durability. Strong permanent Neodymium magnets for fast and effective bead separation. Compatible with standard 0.2 mL PCR tubes, either as individual tubes or strip tubes. Double-sided, with two sets of magnets. Can be used on either small volumes (5 - 50 μl, see figure top right) or larger volumes (50 - 200 μl, bottom right).
TrippNT Dissolution Vessel Holder
TrippNT's Dissolution Vessel Holder can hold 6 dissolution vessels with widths up to 4 3/8". The corners are open to allow water to flow through and allow carrier to drain. On either side of the holder there are handles cut into the material for easy transportation. This holder is constructed out of white PVC and ships fully assembled.
•White Rectangular Design with (6) 4 3/8" Diameter Openings
•Corners are Open to Allow Water to Flow Through and Allow Carrier to Drain
•Constructed from White PVC
•Holds Dissolution Vessels so they can be Easily Transported
•100% Total Replacement Lifetime Guarantee/Made in USA
TrippNT Double Face Mask Holder
TrippNT's Clear Acrylic Double Face Mask and Safety Apparel Holder keeps your PPE safe and visible. It has a clear hinged lid and 2 easy to load compartments. This product has keyholes for mounting with provided hardware; it weighs 2.2 lbs and is 12 x 9 x 6 inches WHD. All TrippNT products are Made in the USA and have a 100% Total Lifetime Replacement Guarantee.
•Double Compartment with Hinged Lid
•Keyholes for Wall Mounting
•Constructed from Clear 1/8 Acrylic , Mounting Hardware Included
•Designed to Store, Dispense and Protect Conical Face Masks
•100% Total Replacement Lifetime Guarantee/Made in USA
Electron Microscopy Sciences 30-Slide Stainless Steel Rack 1 each
This 30-slide rack is made from non-tarnishing stainless steel and it is resistant to most staining solutions. The handle is permanently attached but it is swing-able to permitting for closure of the dish and easy insertion and removal of the slides.